Rear pictures

remstien · June 13, 2005

Hey everyone, new to the site. Looking to see if anyone has shots of their truck from behind. Looking to see the different stances of lifted and non lifted trucks. Also for those with aftermarket exhaust, where the tail pipes come out.

thanks

Frank S · June 14, 2005

Moved at author's request

GF7PE · June 14, 2005

here is a shot from behind. Hope its what you are looking for

MCourson · June 15, 2005

Black-Z71 · June 15, 2005

remstien · June 17, 2005

thanks. Thats the idea. Anyone else?

RAYS B4U · June 21, 2005

steve summers · June 21, 2005

Here is my 05 GMC CC/SB and my Buddy's 05 GMC 2500HD CC.

I've now lowered mine 2" in the back after this picture. I also swap out the cheesy GMC tailgate cap for the earlier Chevy unit. We removed the 4x4 stickers on his truck and the Z71 stickers on mine. Also on mine I've removed both the Sierra emblem,the GMC emblem, and the SLT emblems.

00HD2500 · June 21, 2005

Here is mine, I dont have tips on my exhaust yet, just the piping. I gotta decide what kind of tips I want haha. I also have the Silverado and Chevrolet badges removed.

Picture!

Mike

ChevyMan23 · June 22, 2005

Here be mine......

BDZ71 · June 27, 2005

The rear

curly · June 28, 2005

I also swap out the cheesy GMC tailgate cap for the earlier Chevy unit.

That's my next mod also since it seems that my new tires will never get here . Why does GMC cheap out with the tailgate covers?

budhayes3 · June 28, 2005

Man, I haven't been around here for a while, and I come back and you all want to see my rear! What have I been missing! Well, here goes...

Before the 03-05 tails

With the new 03-05 tails

BTW, I take pretty crappy pictures...d**n digital throwaways!

steve summers · June 28, 2005

I also swap out the cheesy GMC tailgate cap for the earlier Chevy unit.

That's my next mod also since it seems that my new tires will never get here . Why does GMC cheap out with the tailgate covers?

<{POST_SNAPBACK}>

It's GMC and Chevy now.

Here are a couple of tips for you if you haven't installed a early model cap.

I buy the caps/screws at the local Line-X dealer, he has a barrel of them and sells the cap and screws for $20. The screws from the dealer are about $4 each. You need the rivnuts to go into the 4 holes in the tailgate, they are about .38 each from your local dealer. I've installed several of the rivnuts with a bolt/nut/washer but finally bought the tool from McMaster-Carr. You will also need some 3M double sided tape for the inside of the cap on the tailgate.

Elwood 2000 · June 29, 2005

I "finished" the gray paint on the tailgate and back of the bed that GM always leaves the top color. I think it gives is a compete look and not unfinished.