3 in lift?

[dbrine]

I have a 96 GMC Suburba 4x4, 1500 5.7L With rear heat. I want to add a 3 in lift to my truck. I currently have a 2 using rear blocks and twisting of the torsion bars. I want to do the lift right and not half-baked. Do they make lift spindles or what route should I go? Don't want to go broke either with a lift. Don't want a body lift either. thanks

[Machine]

From what I've seen, most of the suspension lifts start at 4". The only lift that hasn't been a minimum of 4" is Pro Comps 2" lift for the F250. If you only want 3" of lift, and not 4", you may have to settle on a body lift. Just go for the 4".

[bfrd22]

Well bodylift is out,, 2 to 3 inch lift kits are out there but everything I have heard has been very negative about the small lifts, Every one alway suggests the 4 inch kits if your going suspension lift.

[nhproxr]

That's because all the 2 or 3" lifts just include blocks for the rear and cranking up the front torsion bars. Go with 4" and front geometry and ride quality are retained.