Not as low as it should be after McGaughy's

TwoPlyLife · April 25

So I got my 2016 WT 2wd and lowered it. It's on McGaughy's #34170 lowering kit. I set it up to be a 4/6 drop. Well sure enough the front is super low in comparison to the rear. It definitely had a huge rake going on. I've double checked and triple checked that everything in the rear was installed correctly and it is. The rear definitely sits lower that what it was originally. Prior to the lowering kit it did sit unusually high from what I could tell. I raised the front to be more level with the rear for the time being so it is sitting at a 2 1/2 drop on the front. It could probably go even a bit higher to be more level.

I guess my question here is were there were different options for leaf springs on these? Is there a way I can check if so?

SeekAndDestroy · April 28

On 4/24/2024 at 8:17 PM, TwoPlyLife said:

I guess my question here is were there were different options for leaf springs on these? Is there a way I can check if so?

There are some companies that make lowering springs. One guy on here is running Deaver leafs.

If you installed the flip kit with your stock spring shackles it will only be 4" lower in the back. To go to a 6" drop you need to use lowering shackles. This might be your issue, and its way cheaper than new springs