Jump to content
  • Sign Up

AC not blowing cold air on driver side


Recommended Posts

  • 2 months later...

Signed up to confirm this.  Below are the symptoms and resolution to this exact issue.

 

2014 GMC Sierra Denali

 

Symptom: On full blast AC mode, driver's side luke warm or hot, passenger side cold.

 

Resolution

1. Turn ignition and power off

2. Remove negative battery cable

3. Remove fuses 35, 55, & 56 from BMX fuse panel "inspect them"

4. Wait 5 minutes...

5. Reinstall fuses 35, 55, &56

6. Reconnect negative battery cable

7. Turn ignition back on

8. Don't touch HVAC controls for 3 minutes.

9. Test Driver vs Passenger side temps

 

Most likely the HVAC door actuator was out of calibration and a loss and return of battery power forces a recalibration of the unit.  Hopefully this helps someone needing clear and concise instructions.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.