Electric Fan Conversion Use With A/C

[Blake4774]

So I have a kit I bought awhile back including radiator, fan shroud, dual fans, temperature sensor, & wiring. I'm curious to if ill need anything more to make them work with my A/C. My kit only came with one relay & I was told earlier this week that dual fan setups are meant to be used 1 fan for cooling, & the other for the A/C...

 

I'm a newbie at such things.

[Brian Lindsey]

i have the flex-a-lite set up , it has a controller,  everything wires into that controller will regulate fans for cooling engine and a/c, my advice before you do this is upgrade your battery cables all power and grounds, they talk about doing the big three , batt positive to alternator, ground from alt to batt , starter cable to batt , and engine ground to frame or body. you can look those up on youtube , but i have a 23 yr old truck , so i upgraded all cables to 1/0 heavy duty, that way there will be no power drop anywhere , also make sure you use 12 gauge wire for your power source , there is a guy on youtube that did it all the wrong way and almost burned up his wiring harness, and while in thinking about it you might want to upgrade your alternator to a 140 amp, the fans will pull alot of amps. thats why all the upgrades to run the fans and save your wiring harness.

if you dont have the flex-a-lite setup ,  painless wiring has a relay set up just for electric fans, i think it has 4 relays all wired ready to go.

[Blake4774]

Thank you for the reply & all the info! I really appreciate it. Does this look about right to you, friend? 

[Brian Lindsey]

it looks right to me , but most setups have more than one relay , look at  painless wiring and look at their fan set up, and make sure your main power wire is 12 gauge 

https://www.painlessperformance.com/wc/fans