Jump to content
  • Sign Up

Recommended Posts

Is there oil loss between oil changes. How many miles are on the motor. What motor is it? But I'm going to say it's not normal. Would think you would start seeing some oil loss.

Edited by Adamace1
Link to comment
Share on other sites

Blue smoke will generally be oil consumption.  Check your engine oil level to verify proper oil level and make sure to add some if its too low as a result of the oil consumption. 

 

There are multiple ways engine oil is consumed, the following three are what I have most often scene:

 

PCV system is allowing oil to be cycled back into the combustion process through the intake.

Valve guides are leaking allowing oil to be sucked into the combustion chamber.

Piston rings are improperly sealed or defective allowing for oil to gain entry into the combustion chamber.

 

Being a relatively new engine, I doubt that you have bad rings or valve guides so I would suggest checking your PCV system for oil in the hose.  If you find oil present, I would highly suggest the installation of a catch can and be done with it.

 

Link to comment
Share on other sites

On 3/28/2021 at 9:07 AM, Adamace1 said:

Is there oil loss between oil changes. How many miles are on the motor. What motor is it? But I'm going to say it's not normal. Would think you would start seeing some oil loss.

Haven't seen any noticeable oil loss, it's a 5.3

Link to comment
Share on other sites

On 3/30/2021 at 12:58 PM, Gangly said:

Blue smoke will generally be oil consumption.  Check your engine oil level to verify proper oil level and make sure to add some if its too low as a result of the oil consumption. 

 

There are multiple ways engine oil is consumed, the following three are what I have most often scene:

 

PCV system is allowing oil to be cycled back into the combustion process through the intake.

Valve guides are leaking allowing oil to be sucked into the combustion chamber.

Piston rings are improperly sealed or defective allowing for oil to gain entry into the combustion chamber.

 

Being a relatively new engine, I doubt that you have bad rings or valve guides so I would suggest checking your PCV system for oil in the hose.  If you find oil present, I would highly suggest the installation of a catch can and be done with it.

 

Thanks for the information, you'd think the service tech would have thought of that, but he only scanned it, looked for visible leaks and a drive around town. Of course no blue smoke puffs, I'll relay this next week when I visit before my warranty runs out.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.