Jump to content

Recommended Posts

Definitely stuck!!

CODE 32 ob1 gm code

the truck is idling really rough (sometimes sounds like it has bigger cams but it doesn’t), it stalls out with a quick snap open of acceleration, fuel mileage has down, loss power. 
I have a new 350 TBI CRATE engine coming I’m just trying to make sure I won’t have the code 32 issue with the new engine. 
 

had a code for an O2 sensor code so I replaced it and it hasn’t been an issue since

 

ive replaced the EGR VALVE and the Solenoid, still was having the issue. So I replaced the MAP, TPS, and IAC valve, figured that would help. Still was having issues. I then replaced the spark plugs, fuel filter and ran a fuel injection service. That helped out a little bit but was still having the code 32 issue. I then replaced the coolant temp sensor on the intake manifold, Evap purge solenoid and vapor canister. That seemed to help out with my fuel economy. I’ve checked for any signs of a vacuum leak using carb cleaner to try and find the leak. I sprayed all the vacuum lines, intake manifold and throttle body and couldn’t find any source of leak. I’ve pushed on the diaphragm of the egr with the truck idling and it definitely changed idle states so I know the passages are clear. I checked the egr solenoid for correct power and measured 12v. WHERE DO I GO FROM HERE?

Link to comment
Share on other sites

  • 3 years later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.