Jump to content
  • Sign Up

2014 Silverado io6 screen


Recommended Posts

I have a 2014 Silverado LT, did the io6 upgrade (originally io5).

 

The right knob on my radio control is messed up.

Looks like its one large piece (Radio module interface).

 

I am trying to find a replacement and was wondering if one off of a 2500 would work or I need to make sure its from a 1500?

 

thanks in advance

Link to comment
Share on other sites

The full size GM trucks all have the same interiors. You can swap over anything from a 1500-3500 with no issues provided it isn't something that is diesel specific. The radios are all interchangeable as the same i05 or i06. Steering wheels and dash components, seats, all of it is the same. You should be good

Sent from my SM-G986U1 using Tapatalk

  • Like 1
Link to comment
Share on other sites

2 hours ago, VanguardK2 said:

The full size GM trucks all have the same interiors. You can swap over anything from a 1500-3500 with no issues provided it isn't something that is diesel specific. The radios are all interchangeable as the same i05 or i06. Steering wheels and dash components, seats, all of it is the same. You should be good

Sent from my SM-G986U1 using Tapatalk
 

95% sure that is completely false and you need to address the can bus.

Link to comment
Share on other sites

95% sure that is completely false and you need to address the can bus.
How so? If you reread the OP's post, he's saying the KNOB is messed up. When you take apart the screen and the radio controls, you can replace them with a new unit. Thats how people change interior colors when they want something other than factory. The knows and screens, provided they are the correct size (4", 7", and 8") are interchangeable.

The programming part is on the I05 and i06 modules which he said he already replaced. Frankielozano214 sells screen and switch units for color conversions all the time.

And the interiors are correct because you need to look at them. I said same between 1500-3500 because they are solverado and sierra trucks. Yukon and Tahoe are same because they are SUVs. You need plugs and adapters for interior mods but you'd need nothing to install a dash panel, seats, carpet and door panels between the series of trucks.

Canbus is for programming, but what he's asking about doesn't require a reprogram. Its a screen and switch (radio knob) replacement at worst case.

Sent from my SM-G986U1 using Tapatalk

  • Like 1
Link to comment
Share on other sites

17 hours ago, VanguardK2 said:

How so? If you reread the OP's post, he's saying the KNOB is messed up. When you take apart the screen and the radio controls, you can replace them with a new unit. Thats how people change interior colors when they want something other than factory. The knows and screens, provided they are the correct size (4", 7", and 8") are interchangeable.

The programming part is on the I05 and i06 modules which he said he already replaced. Frankielozano214 sells screen and switch units for color conversions all the time.

And the interiors are correct because you need to look at them. I said same between 1500-3500 because they are solverado and sierra trucks. Yukon and Tahoe are same because they are SUVs. You need plugs and adapters for interior mods but you'd need nothing to install a dash panel, seats, carpet and door panels between the series of trucks.

Canbus is for programming, but what he's asking about doesn't require a reprogram. Its a screen and switch (radio knob) replacement at worst case.

Sent from my SM-G986U1 using Tapatalk
 

Your post isn’t wrong I guess, it just makes it sound a lot easier than it is. I understand they are all the same platform. But it’s not exactly screw it on and your done with most anything thats electronic.

Link to comment
Share on other sites

  • 2 weeks later...

Thanks for the info, found a replacement one off another 1500.

 

But just FYI to Vanguard, not all the interior is the same between 1500 vs 2500, the steering wheels have different weights in them, I have already done the heated steering swap on both my Silverado and Sierra and had to watch out to make sure to order the correct P/N for a 1500 and not 2500 truck.

 

When I was looking up P/N for the radio, the 2500 had a different one than the 1500, they look the same, but not sure why the part numbers were different. 

Also Silverado and Sierra have different P/N because the silver trim piece is slightly different, tried swapping the two to see if they were interchangeable, and they work, but the silver is different (Silverado is more gloss and the Sierra is a flat brushed look), same with the steering wheel trim.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    247.7k
    Total Topics
    2.6m
    Total Posts
  • Member Statistics

    336,649
    Total Members
    8,960
    Most Online
    Fezic
    Newest Member
    Fezic
    Joined
  • Who's Online   5 Members, 1 Anonymous, 967 Guests (See full list)



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.