Jump to content
  • Sign Up

Recommended Posts

I purchased a new 2018 Silverado 1500 LT less than a year ago.  It had 55 miles on it when I drove it off the lot in April of '19.  It just clicked 14K and I am well within my warranty period.  Recently, while making left turns, at low speed, such as parking lots and turning corners the rear wheels lock. It locks enough to drag the wheels and I chirp the tires as I corner. It sounds like the rear differential is grinding as I power through the turn. It as if the 4WD engages or the posi locks. I have the auto 4WD option, however, it is always in 2WD when this happens. As soon as I straighten out or make a right turn it goes away/unlocks. The dealership cannot find anything wrong. What gives??

Edited by Josh Tonn
Link to comment
Share on other sites

My guess.

Do you have the G80 rear end?

Has the rear diff ever been serviced?

Might be the wrong gear lube was put in the rear end.

No modifiers in the gear lube are required for the G80.

Check out this thread.

:)

Link to comment
Share on other sites

16 minutes ago, diyer2 said:

My guess.

Do you have the G80 rear end?

Has the rear diff ever been serviced?

Might be the wrong gear lube was put in the rear end.

No modifiers in the gear lube are required for the G80.

Check out this thread.

:)

I have no knowledge of any differential service.  I purchased the truck with 50 miles on the odometer in April of '19.  It just clicked 14K.  Well within its warranty and only routine oil changes and tire rotates.  This is frustrating for a brand new truck.

Link to comment
Share on other sites

49 minutes ago, Josh Tonn said:

I purchased a new 2018 Silverado 1500 LT less than a year ago.  It had 55 miles on it when I drove it off the lot in April of '19.  It just clicked 14K and I am well within my warranty period.  Recently, while making left turns, at low speed, such as parking lots and turning corners the rear wheels lock. It locks enough to drag the wheels and I chirp the tires as I corner. It sounds like the rear differential is grinding as I power through the turn. It as if the 4WD engages or the posi locks. I have the auto 4WD option, however, it is always in 2WD when this happens. As soon as I straighten out or make a right turn it goes away/unlocks. The dealership cannot find anything wrong. What gives??

Do you mean the dealership can’t duplicate the problem?

 

Also are you saying it doesn’t happen when you’re in auto 4wd?

 

Is it only turning left?

Link to comment
Share on other sites

G80 could be stuck locked. Shut off traction control, mat it in reverse enough to chirp the tires. See if it's unlocked after switching back to drive. Either way the dealer should have fixed it.


Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites

G80 could be stuck locked. Shut off traction control, mat it in reverse enough to chirp the tires. See if it's unlocked after switching back to drive. Either way the dealer should have fixed it.


Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites

G80 could be stuck locked. Shut off traction control, mat it in reverse enough to chirp the tires. See if it's unlocked after switching back to drive. Either way the dealer should have fixed it.


Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites

Could be normal as they will act that way sometimes. Older service info but still applicable.

Quote

Condition/Concern:
Customers may comment on a chatter or shudder from the rear axle on vehicles equipped with an Eaton locking differential. This condition would be noticed in parking lot maneuvers, turning, or during locking differential engagement and may be more noticeable when the differential is hot. Locking differential clutch chatter may be causing this concern.

If differential clutch chatter is encountered in a vehicle equipped with an Eaton locking differential, flush, drain and refill the differential with new synthetic fluid.
Important: Installing any friction modifier causes the clutch pack in the locking differential to slip and miss engagement. A fluid flush can often remove debris that is a contributor to clutch chatter. Adding friction modifier additive can cause a loss of locking differential functionality

Mass production and cost concerns lead to "good enough" (low bid supplier) but not necessarily the best available. Look at OEM tires, for example, decent quality, "good enough" quality, but not necessarily the best available. The same could be said for shocks, brake pads, oil and filters.

Edited by elcamino
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.