Lower control arm mount repair

[John Sanches]

Hey, I'm new here.  I was doing a brake job and noticed that the front lower control arm bolt is no longer attached to the frame.  There is an access hole that is  seen from the front welded to the frame in the rear which is cracked. The bolt goes through this bracket, then through the bushing, then though a hole in the frame 

[John Sanches]

Some more info-   

The bolt is attached to a chunk of metal which used to be part of the frame but is no longer attached.  The bolt then passes through the control arm bushing then though a bracket which is cracked.  So the lower control arm is being held on by the rear bolt.  Is there a repair for this? It's scary because it's my daily drive. 

[eppieguy]

Wrong forum, this is for the T1 trucks, try the K2 forums, should get better responses.

[John Sanches]

O.k. thanks! Total newbie here. 

[davester]

can you post a pic of this?  As if the LCA has truly separated from it's mounting points, you should fairly quickly expect that wheel to not be pointing in the right direction if it undergoes much stress (say, turning away from that side).