Silverado High Country on new 22s

[Rakkasan_Justin]

My friends over at Concept One Wheels sent me over a set of wheels for my High Country to tied me over until my Long Travel and Off-Road goodies arrive.

 

Specs are:

Concept One CS6

22 x 9.5" +18

Matte Black w/ Gloss Black Lip

 

Wheels bolt up no problem, with ~2mm of clearance to the Caliper. The wheels also come in Silver with a Chrome Lip

 

Going to have more pictures tomorrow with the OEM tires mounted and it sitting on the ground, sorry for the disassembled truck, I'm in the process of wrapping it right now .

[FirstAscent]

Sweet! excited to see more, especially the LT setup!

[Daverado]

Nice wheels.. the style reminds me a bit of Volk TE37s.  Which reminds me I have a blue truck now and maybe I could consider bronze wheels.

 

Still disappointed I couldn't fit my old black 16" OZ Crono 4x4s over the new brake calipers.

 

Edited January 25, 2019 by Daverado

[StevenStarke]

I think you mean -18mm offset?

[FirstAscent]

I think you mean -18mm offset?

Those wheels actually do look like +18’s

[StevenStarke]

3 hours ago, FirstAscent said:

Those wheels actually do look like +18’s

Most 0mm wheels don’t fit, I’d be shocked if a non OEM +18mm wheel fit. 

[Rakkasan_Justin]

On 1/26/2019 at 10:21 AM, StevenStarke said:

I think you mean -18mm offset?

 

+18, and it clears by 2-3mm

[Rakkasan_Justin]

Finished car with the wheels bolted on after getting Ceramic Coated and the finished full wrap. End result looks clean

[FirstAscent]

Most 0mm wheels don’t fit, I’d be shocked if a non OEM +18mm wheel fit. 

I completely agree [emoji4] so am curious on that as well. I was just going off the photos where it didn’t look like a deep enough offset to be -18

[mention=198180]rakkasan_justin[/mention] can you confirm on the fitment/offset?

 

EDIT: oops just saw your post after I hit submit

[Rakkasan_Justin]

A couple high res photos from a shoot by the wheel company. Absolutely loving the look, If I wasn't dead set on a Pre-Runner build I would be looking for a small lowering kit and call it a day

[alipor]

Looks great.

[FirstAscent]

Looks great indeed, and love the matte look on the paint

[RyanbabZ71]

Any closeups of the door handles? How hard was it to wrap them?


Ryan B.

[Rakkasan_Justin]

2 hours ago, FirstAscent said:

Looks great indeed, and love the matte look on the paint

It's actually a Satin finish, close to matte, but more of a sheen. It's much more durable than matte

16 minutes ago, RyanbabZ71 said:

Any closeups of the door handles? How hard was it to wrap them?


Ryan B.

Not as hard as I expected with the Shadow Black being a thicker/textured vinyl. The handles themselves are extremely easy if you use the cold pre-stretch method. I've done Silverado handles with gloss, matte, and satin without using any heat and handles on the truck. Shadow required some heat, but not that bad.

[towdog333]

On 1/24/2019 at 7:40 PM, Rakkasan_Justin said:

My friends over at Concept One Wheels sent me over a set of wheels for my High Country to tied me over until my Long Travel and Off-Road goodies arrive.

 

Specs are:

Concept One CS6

22 x 9.5" +18

Matte Black w/ Gloss Black Lip

 

Wheels bolt up no problem, with ~2mm of clearance to the Caliper. The wheels also come in Silver with a Chrome Lip

 

Going to have more pictures tomorrow with the OEM tires mounted and it sitting on the ground, sorry for the disassembled truck, I'm in the process of wrapping it right now .