Front tires stick out farther then rear?

[hondarider94]

Just noticed on my truck that my front stick out farther. Offsets are the same on my 20x10s. I remember older chevys did this too. What size spacer would make it equal?

[Heavy 5.7]

It's called "track" and to answer your next question, yea it's important.

[hondarider94]

It's called "track" and to answer your next question, yea it's important.

meaning I shouldnt put a spacer in? Why do other brands not have track

[jimmyboy8301]

Do you have a lift kit? That's the only way your front would be sticking out further

 

 

Sent from my iPhone using Tapatalk

[newdude]

meaning I shouldnt put a spacer in? Why do other brands not have track

 

Have you ever been behind an Ford Super Duty? Every truck out there has a narrower rear track width than the front.

 

K2 Silverado 1500 has a front track of 67.96" and rear track of 67"

[hondarider94]

Do you have a lift kit? That's the only way your front would be sticking out further

 

 

Sent from my iPhone using Tapatalk

6.5"

[hondarider94]

 

Have you ever been behind an Ford Super Duty? Every truck out there has a narrower rear track width than the front.

 

K2 Silverado 1500 has a front track of 67.96" and rear track of 67"

I mean I havery, but I dont feel it's that noticeable. Mine is

[jimmyboy8301]

6.5"

knuckle lifts (which you probably have) push the front track out 1.5" per side due to CV spacers. 1.5" rear spacers will correct that

 

 

Sent from my iPhone using Tapatalk

[Heavy 5.7]

[hondarider94]

knuckle lifts (which you probably have) push the front track out 1.5" per side due to CV spacers. 1.5" rear spacers will correct that

 

 

Sent from my iPhone using Tapatalk

is there a brand of spacers everyone prefers? I know to use hub centric ones.

[jimmyboy8301]

is there a brand of spacers everyone prefers? I know to use hub centric ones.

BORA by Motorsport Tech

 

 

Sent from my iPhone using Tapatalk

[hondarider94]

BORA by Motorsport Tech

 

 

Sent from my iPhone using Tapatalk

Is that the only brand? I really don't think the front is out 1.5 inch farther.

I think it's more like half or 3/4 and bora starts at 1in spacer

[jimmyboy8301]

Is that the only brand? I really don't think the front is out 1.5 inch farther.

I think it's more like half or 3/4 and bora starts at 1in spacer

there are other brands but bora is arguably one of the very best. What brand kit do you have?

 

You can also measure the cv spacers......

 

 

Sent from my iPhone using Tapatalk

[hondarider94]

Will a 1" spacer bolt right up? I was reading I might have to cut studs or something??

[jimmyboy8301]

Will a 1" spacer bolt right up? I was reading I might have to cut studs or something??

yes you will have to cut studs

 

 

Sent from my iPhone using Tapatalk