Jump to content

35 on truck with stock rims


Recommended Posts

Looks great! I like those rims with oversize tires. Although I've noticed, especially with 20" wheels that the tires never look really big like the old floatation sizes did.

I have 33" tires on mine and they look small compared to the 33" MTR'S I had on my 2500 HD.

 

Sent from my E6810 using Tapatalk

Link to comment
Share on other sites

20170225_172731.jpg 20170225_172728.jpg 20170225_172722.jpg 20170225_172726.jpg 20170225_172710.jpg 20170225_172704.jpg 20170225_172700.jpg 20170225_154942.jpg 20170225_154930.jpg 20170225_104250.jpg 20170225_154807.jpg

So I put 35 inch tires on a 4 inch tuff country lift and added a 1.5 inch bodylift on a 2016 1500 z71 6.2l

 

Sent from my SM-G930W8 using Tapatalk

Nice looking truck. Are those wheels off a Sierra?
Link to comment
Share on other sites

  • 4 weeks later...

BDS 4" lift with stock AT wheels with 1.5"spacers in the rear

 

a0c8a3ec9df5f2aafa0c65bac8c1b9d9.jpg

 

Sent from my SM-G935V using Tapatalk

Any rub in the front. I want to get a 4 inch lift but every kit I look at says you cannot use stock rims. Why did you place 1.5 inch spacers in the rear.

Link to comment
Share on other sites

Any rub in the front. I want to get a 4 inch lift but every kit I look at says you cannot use stock rims. Why did you place 1.5 inch spacers in the rear.

Just bearly touches the liner on a full lock but i get no major rub.

 

The front track gets pushed out about an inch and i have OCD so the front being wider then the back would drive me crazy.

 

But yes 35s DO fit with the BDS 4" lift.

 

I can get some different shots if it at full lock if you want

 

Sent from my SM-G935V using Tapatalk

Edited by Txjose
Link to comment
Share on other sites

Just bearly touches the liner on a full lock but i get no rub.

 

The front track gets pushed out about an inch and i have OCD so the front being wider then the back would drive me crazy.

 

But yes 35s DO fit with the BDS 4" lift.

 

I can get some different shots if it at full lock if you want

 

Sent from my SM-G935V using Tapatalk

If you can that would be great. Did you look at other setups besides the bds kit. I have a denali with magnetic ride control so my options are a little limited on what I can get. I am considering running 33s instead of 35s so it may get me a little more room. Not sure why all the kits say we cannot retain the use of stock rims.

Link to comment
Share on other sites

If you can that would be great. Did you look at other setups besides the bds kit. I have a denali with magnetic ride control so my options are a little limited on what I can get. I am considering running 33s instead of 35s so it may get me a little more room. Not sure why all the kits say we cannot retain the use of stock rims.

I only looked at BDS nad Zone since they are the highest rated kits aming the forums. Just couldn't do the Zone because the front spacer for the struts looks weird to me.

 

Most of the time companies under rate the kits for tires size to guarantee no rub and good fitment, if you are ok with a touch of rubbing i personally think 35s look much better on a 4" vs a 6". Heck i ran 33x12.5x20s on my 2014 Silverado with just a 2" level up front with the same amount of rubbing i have now with the 4" and 35s on the new sierra.

 

Sent from my SM-G935V using Tapatalk

Link to comment
Share on other sites

I only looked at BDS nad Zone since they are the highest rated kits aming the forums. Just couldn't do the Zone because the front spacer for the struts looks weird to me.

 

Most of the time companies under rate the kits for tires size to guarantee no rub and good fitment, if you are ok with a touch of rubbing i personally think 35s look much better on a 4" vs a 6". Heck i ran 33x12.5x20s on my 2014 Silverado with just a 2" level up front with the same amount of rubbing i have now with the 4" and 35s on the new sierra.

 

Sent from my SM-G935V using Tapatalk

Thanks for the info. So far all have looked at procomp and rough country as they have a kit that works with the magnetic ride. I will check to see what zone has to offer as with bds I believe they only offer a 6 inch lift for magnetic ride and may be a little higher than I want to go. Procomp says no on stock rims and rc says i need spacers. I have read rc are junk but dont have experience with them.

 

Edit: just checked out zone and not sure if they work with the magenetic ride their site does not say. I may have to email them and see or stop by one of my local lift shops.

Edited by mjdxtreme
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.