Lowered guys what's your tire size!?

bwright2112 · June 5, 2018

They do! Really nice kit too, I welded mine instead of drilling and using the supplied bolts/spacers because honestly, once you cut the frame you won’t ever be able to remove the c-notch so why waste time drilling and bolting. Once you cut the frame the notch should stay in there forever.

Nasty · June 5, 2018

2 minutes ago, bwright2112 said:

They do! Really nice kit too, I welded mine instead of drilling and using the supplied bolts/spacers because honestly, once you cut the frame you won’t ever be able to remove the c-notch so why waste time drilling and bolting. Once you cut the frame the notch should stay in there forever.

Pictures and part number please. I bought an underbed notch but I havent installed it yes. Because it would be easier to reverse a regular c notch than an underbed

bwright2112 · June 6, 2018

Yea this one comes with C-Notch and crossmember notch for rear end (“pumpkin”)

Part #6524

Nasty · June 6, 2018

1 minute ago, bwright2112 said:

Yea this one comes with C-Notch and crossmember notch for rear end (“pumpkin”)

Part #6524

I wonder why it doesnt state for 16 17 when it's the same frame

bwright2112 · June 6, 2018

Not sure, I’m sure you could call and ask but I am willing to be they just haven’t tried it yet. Might be able to get lucky and be their tester and get it cheap and/or free install

Cardinals11 · June 6, 2018

305/40r22 on mine.

Sent from my iPhone using Tapatalk

K_Sevy · July 24, 2018

Here's my 2015 4wd on 285/45/22 with a Belltech 3/4 drop.

Slapps74 · July 24, 2018

On ‎1‎/‎23‎/‎2017 at 5:23 PM, bakerrr said:

I run 305/40/22 on a 4/7 and rub on big dips and when in full lock

Similar for me. Same wheels even but I run a 285/40/22 on the front and no rubbing

UofAZCats · July 25, 2018

Stock 285/45/22 on a 4/7 drop. Lock up front for tight turns. Going to be raising it up to 2/4 soon and adding 1.5" spacers. Looking for that street truck look and want to be able to drive it without steering limitations.

For the guys running 305/40/22s on Chevy OEM rims - where did you find tires that size that fit on the 9" wide OEM rims?

kogdevilnuts · November 8, 2018

On 2017-01-23 at 7:23 PM, bakerrr said:

I run 305/40/22 on a 4/7 and rub on big dips and when in full lock

Dear god that’s sexy ?

lsxgarage · October 17, 2019

On 8/26/2017 at 10:50 PM, qwank said:

I'm running the stock 285/45R22 because I got them for free. I'l most likely go with 305/40R22 next time around.

What about a 285 22 up front and the 305 24 in the rear. Would be sporty and you could drop the rear a extra I ch to level this out.

lsxgarage · October 17, 2019

On 1/25/2017 at 12:27 AM, Marv88 said:

Every time I see the great look as well as photography of this truck I say to myself "this bad boy should be in a Chevrolet commercial!"

Please let us knowwhere u got these wheels.

And full specs. Size and offsets