Jump to content
  • Sign Up

new member to the family

mfbearded

By mfbearded
in Off-Topic

Recommended Posts

mfbearded Enthusiast

mfbearded

Posted
  • Author
Posted

Originally a 396SS, now has 350 crate motor with 10:1 compression with 7,100 miles. 202 Summit heads, roller rockers and Weiand Stealth manifold, Holley 750 carb,, 700 R auto transmission, 2800 stall converter, 12 bolt posi rear with 411 gears, new 1969 Camaro power front disc brakes with steel braided lines, quick ratio power steering, Flowmaster exhaust, ceramic coated headers, B&M Quicksilver shifter. Shocks, calipers, rotors, pads, drums, c-clip eliminators, tires are all new. Dont have any Dyno info for horse power or torque but she is quick.

Link to comment
Share on other sites
Countryboy5612 New Member

Countryboy5612

Posted
Posted

Any Ideas????????

 

I have a 2003 Chevy Silverado lS 4.8l 4x4 with a a manual t case lever I can not get my 4 wheel to engage. Checked the fluid in the front diff and don't see any metal flakes or chunks. I put it on a lift and put it in 4h and drive and the front wheels do not spin but I can hear the t case chain and see the drive shaft spinning. When I engage 4h I can hear the actuator on the front diff engage but no tire spin.my indicator lamp on the dash comes on. I'm at a loss the only things I can think are the front diff actuator sounds like it's working but isn't or a total diff failure. But if I manualy spin the wheels I don't hear anything from the front diff. So I figure even though my actuator sounds like it's working it really isn't. Any ideas or conclusions I haven't thought of????

Link to comment
Share on other sites
RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted

Any Ideas????????

 

I have a 2003 Chevy Silverado lS 4.8l 4x4 with a a manual t case lever I can not get my 4 wheel to engage. Checked the fluid in the front diff and don't see any metal flakes or chunks. I put it on a lift and put it in 4h and drive and the front wheels do not spin but I can hear the t case chain and see the drive shaft spinning. When I engage 4h I can hear the actuator on the front diff engage but no tire spin.my indicator lamp on the dash comes on. I'm at a loss the only things I can think are the front diff actuator sounds like it's working but isn't or a total diff failure. But if I manualy spin the wheels I don't hear anything from the front diff. So I figure even though my actuator sounds like it's working it really isn't. Any ideas or conclusions I haven't thought of????

Um ??????? Wrong topic

 

 

Ryan

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept