3in level with 35s?

[AgDoctor]

I did the 3 inche level kit upfront and put 35s. Bfg ko2's slight rub on full turn. I did not trim anything.  I will most likely trim a little tomorrow.

Are those 285/65R20? Looks nice!


Sent from my iPhone using Tapatalk

[THE_Engineer]

I am currently running 35/11.5 on a 2.5 inch RC level. Tires rub at full lock but other than that I haven't had any issues. You will have to trim the wheel liner a little.

[Jmiranda]

On 10/25/2017 at 4:43 AM, pineland said:

 

Are those 285/65R20? Looks nice!


Sent from my iPhone using Tapatalk

 

35x12.50 R20

[pewterliftedz]

7 hours ago, Jmiranda said:

35x12.50 R20

There is no way that you aren't rubbing on the sway bar and control arm, unless you're running some sort of spacers.  But then you would be rubbing the inner fender.

 

I ran 305/55r20 on factory wheels, and it rubbed the sway bar and control arm bad.

[THE_Engineer]

10 hours ago, pewterliftedz said:

There is no way that you aren't rubbing on the sway bar and control arm, unless you're running some sort of spacers.  But then you would be rubbing the inner fender.

 

I ran 305/55r20 on factory wheels, and it rubbed the sway bar and control arm bad.

he said there is minor rub at full lock? same thing i said above as well....you will slightly rub the control arm at full lock.