Jump to content
  • Sign Up

How to sufficiently drain a 4L60e transmission.


Recommended Posts

I want to drain near 99% of the old ATF of my 2007 Silverado classic 1500 4.3 2wd truck. I had previously did a fluid (Valvoline DXRN VI) n filter (pro king filter) change on the truck at 30k miles, 4 years ago. The truck has about 53k miles on it now but this time I wanna do a complete service with DXRN VI and a WIX filter. So should i disconnect the AT cooler line from the top or bottom of radiator and let the truck drain all the fluid out before removing the pan the change the filter?

Link to comment
Share on other sites

You could do a complete fluid change by putting the lower cooler inlet hose in an empty bucket to collect fluid and the top cooler inlet hose in a container of fresh new fluid. The transmission should in theory suck the fresh fluid and pitch out the old fluid. However, having said all of that, it is normally not recommended that all the fluid be changed. A fluid and filter change (by dropping the pan) every 30k will do you fine. NO GM shop manual recommends doing a complete fluid flush. For what it's worth, I've got 183k on my original tranny (well, now my parents do) doing fluid/filter changes every 25k. And I have pulled some heavy trailers some long distances.

Link to comment
Share on other sites

  • 5 weeks later...

You could do a complete fluid change by putting the lower cooler inlet hose in an empty bucket to collect fluid and the top cooler inlet hose in a container of fresh new fluid. The transmission should in theory suck the fresh fluid and pitch out the old fluid. However, having said all of that, it is normally not recommended that all the fluid be changed. A fluid and filter change (by dropping the pan) every 30k will do you fine. NO GM shop manual recommends doing a complete fluid flush. For what it's worth, I've got 183k on my original tranny (well, now my parents do) doing fluid/filter changes every 25k. And I have pulled some heavy trailers some long distances.

And since you did that 25k ATF n filter change, has the transmission been very reliable at 183K with unnoticeable shifts?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    247.7k
    Total Topics
    2.6m
    Total Posts
  • Member Statistics

    336,545
    Total Members
    8,960
    Most Online
    Lukasz Chmist
    Newest Member
    Lukasz Chmist
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,003 Guests (See full list)



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.