Jump to content

2014+ Truck Bed / Tonneau Covers


Recommended Posts

If the drop-in plastic bedliner fits OVER the rails, it will interfere with most covers and so the drop-in will need to be cut. If the drop-in bedliner fits UNDER the rails, you're probably OK in most cases. In some cases, you may have to trim the drop-in so that the cover's clamps will fit properly. In both cases (under and over the rail bedliner), the bulkhead piece (area behind the rear window) should be cut off. It's not mandatory, but most covers will fit much better with the bulkhead piece trimmed off. If you don't cut it off and you have factory plastic rail caps, there will be a gap between the factory rail cap and the drop-in bulhead piece and that's where water will leak into the bed.

 

Of course, you could remove the plastic bedliner and throw it away instead of cutting it.

Edited by TruckDaddy
  • Like 1
Link to comment
Share on other sites

Here's too pictures of the bed cover. Its dark outside right now otherwise I'd go take one. The first was taken when I was looking it prior to purchase to show the scratches in the plastic on top of the tailgate, but you can see how high the liner comes up in the front of the bed. The second was from the dealer pictures.

 

post-143294-0-79279200-1446166728_thumb.jpg

 

post-143294-0-57319000-1446166738_thumb.jpg

 

post-143294-0-79279200-1446166728_thumb.jpg

post-143294-0-57319000-1446166738_thumb.jpg

post-143294-0-79279200-1446166728_thumb.jpg

post-143294-0-57319000-1446166738_thumb.jpg

post-143294-0-79279200-1446166728_thumb.jpg

post-143294-0-57319000-1446166738_thumb.jpg

Link to comment
Share on other sites

Does the drop in liner fit under the rails? If so most of the folding covers should work, but routing the drain tubes on some may require drilling.

I have an Extang Solid Fold 2.0 that does not require additional side rails or a drain tube.

I was able to get it for $760 from an authorized dealer and it was shipped directly from Extang.

 

 

 

If the drop-in plastic bedliner fits OVER the rails, it will interfere with most covers and so the drop-in will need to be cut. If the drop-in bedliner fits UNDER the rails, you're probably OK in most cases. In some cases, you may have to trim the drop-in so that the cover's clamps will fit properly. In both cases (under and over the rail bedliner), the bulkhead piece (area behind the rear window) should be cut off. It's not mandatory, but most covers will fit much better with the bulkhead piece trimmed off. If you don't cut it off and you have factory plastic rail caps, there will be a gap between the factory rail cap and the drop-in bulhead piece and that's where water will leak into the bed.

 

Of course, you could remove the plastic bedliner and throw it away instead of cutting it.

 

The drop-in liners fit under the SIDE RAILS (important distinction). The factory liner does not come up over the FRONT RAIL while some aftermarket liners do. Personally, I would opt for an aftermarket drop-in that comes up over the front rail (but is still considered an under-rail liner because that's relative to the side rails).

Link to comment
Share on other sites

Question about Autoanything and coupon codes. I have a code for 20% off my first order with them. Today in my email I got another email that says they are having a flash sale with 20% off code. Do they let you use both codes to buy a cover? I see the Access Vanish and think it would be pretty sweet at 40% off.

 

Thoughts?

 

I chatted with Autoanything and was told exactly what I thought. Nope, only one code at a time.

Edited by Eddie 70
Link to comment
Share on other sites

Question about Autoanything and coupon codes. I have a code for 20% off my first order with them. Today in my email I got another email that says they are having a flash sale with 20% off code. Do they let you use both codes to buy a cover? I see the Access Vanish and think it would be pretty sweet at 40% off.

 

Thoughts?

 

I chatted with Autoanything and was told exactly what I thought. Nope, only one code at a time.

 

They were going to let you use a 20% off on a tonneau cover? I tried to purchase a Undercover Flex on there today and the 20% off did not apply.

 

 

Does anybody know of any sites that will be having sales soon. I know Black Friday is coming and would like to purchase a tonneau cover soon.

Link to comment
Share on other sites

The 20% code that Autoanything give you does not work for a whole lot of products that they sell. Click restrictions link to see all the companies that you can not use the discount for.on the

  • Like 1
Link to comment
Share on other sites

The one thing I did when I just purchased a Tonneau cover was I started a chat session and told them that I thought that not being able to use the code on anything that I wanted was not right and they did and up giving me 10% off of the cover.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.