Jump to content
  • Sign Up

Swap 2014 SLE Headlights for SLT w/ LEDs?


Recommended Posts

I think mine my have melted from heat and not current. The design having both fuses touch each other is stupid. I'm gonna try this one with an inline fuse that will sit outside the fusebox. http://www.amazon.com/WirthCo-30800-Battery-Doctor-Fuses/dp/B000CQDRTI/ref=sr_1_11?ie=UTF8&qid=1461625713&sr=8-11&keywords=tap+a+fuse

Link to comment
Share on other sites

signboy, do you have any strain relief on the red wire from the add-a-fuse? When I first installed mine, I just plugged it in to the fuse socket, added a small cutout on the fuse box for the wire, and left it at that. When I checked it later, it seem the wire bundle would slightly pull on the wire (and the add-a-fuse.) After my incident the other day, I took extra time to wire tie the red wire just outside of the fuse box and made sure that the red wire was not pulling on the rest of the add-a-fuse. We'll see if that helps any or not. I'll add a picture later when I'm near the truck.

Link to comment
Share on other sites

Wow. That seller also has a pair of 2016 Silverado LED headlight as well. Brand new pulled off a truck.

 

Personally I will wait to see if the price goes down a bit or a good adapter is made... then I'll consider blowing some money.

 

Link to comment
Share on other sites

The connector is smaller,has 5 wires,extra red wire is for signal return/lamp out indicator,tried to hook them up tonight but the signals are flashing fast,will give it another tryl tomorrow.

They are hyper flashing because there's not enough resistance with the LED's. You would need to get the taillights with built in resistors or add in-line resistors.

 

Sent from ATT Motorola 4G Android using Taptalk

Link to comment
Share on other sites

Hi guys long time for me to come back on, we have the tail lights harness all done, parts to make a lot of them are on the way, be here next week, now for the new headlights, we have that ready to test, will be doing it today and all week end, look for some pick next week when we have some headlight too to sale.

  • Like 2
Link to comment
Share on other sites

Hi guys long time for me to come back on, we have the tail lights harness all done, parts to make a lot of them are on the way, be here next week, now for the new headlights, we have that ready to test, will be doing it today and all week end, look for some pick next week when we have some headlight too to sale.

Patiently awaiting.

Link to comment
Share on other sites

Any idea if you guys can get the headlights working on the 1500, would it be the same on the 2500?

 

 

Sent from my iPhone using Tapatalk

Don't think that's a problem call us up and will get you set, by the way we ran the new harness and it works, after this weekend it will be on the site, headlights are on the way too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.