Here's what I'm going for

nate1dawgg · May 10, 2012

I'm going to go with a 2" Zone lift kit. Looking around I think I'm going to stack the blocks, as the Zone instructions recommend. I know there are a ton of opinions on stacking blocks, but this is what I'm going with. I only have one problem. I'm torn between Bilstein's for the rear, or just stock. Hopefully I'll get this installed in the next couple of weeks and I'll make sure and get some pics up.

ruggedlife · May 11, 2012

nobody replied so i will, every time you stack a block, god kills a puppy. do you condone puppy killing?

scz71864 · May 11, 2012

why dont you buy a 3inch block and take the factory off? if you put the blocks in you will stretch the factory shocks in the rear. i would say change them out for longer ones. wont be that big of a deal but will work out in the long run.

Big Whiskey · May 11, 2012

nobody replied so i will, every time you stack a block, god kills a puppy. do you condone puppy killing?

Good post.

With the Zone 2" kit, stacking blocks is just fine to do...and if you ever decide you don't want quite as much rake, you can always just take the factory block out. However, if you know for sure you still want close to the factory rake, then just but a 3" block from Zone instead of the 2" (you may have to call them to make the switch)....then you won't have to worry about the lift block police.