Search the Community
Showing results for tags 'remote'.
Found 10 results
-
2019 Sierra SLT. Remote start will not work. I've checked all the security features it needs to operate. Tested battery. 12.4 volts. After pressing the lock on my key fob, I then hold the start button. The lights flash but the start process does not initiate. Every other function on the key fobs work. The truck will start manually by pressing the start button on the dashboard. I have also replaced the batteries in my key fobs. I also have the My GMC app active. It sends the start function to the truck. Flashes the lights but does not start. Any suggestions? -
Ok, something just started happening with our 2016 GMC 2500HD Denali 4x4 with the diesel. The remote door lock and unlock won't work every time from either of our fobs. We bought this truck last August so I can't imagine the batteries in both of our fobs have died at the exact same time and only 7 months in. My fob gets used the most with my wife's fob barely getting used at all. Anyone else experience/experiencing this? And, what did you do to remedy it? I guess we can try replacing batteries first, but batteries only lasting 7 months in a fob? And both failing at the same time, especially given one gets frequent use and one barely gets any use. We know it's not a fuse because it does work from time to time. -
I have a 2012 Suburban, owned since new. Yesterday the key fob / remote / keyless transmitter stopped working. It stopped, then worked a couple times to unlock, then quit completely. I assumed it was a bad battery (10+ years old), so I replaced it with a new battery, still didn't work. I have the second remote that's only been used a couple times when the keys were "lost", and it doesn't work either. No response from any buttons. I checked the batteries in both, and both batteries are at 3.3 volts. I pulled the DSM fuse for 5 minutes and then disconnected the vehicle battery for 5 minutes, no change. I have tried holding the remote right next to where (I think) the RCDLR is in the left-rear pillar, still no response. The TPMS system works fine, reading all 4 tires correctly with no errors. I hooked up my ODB2 scanner, and it doesn't show any codes. Do I have two dead remotes? Or has the RCDLR partially stopped working? I called the dealer, all they said was "buy a new remote, your two remotes have died". I asked, why would an unused 10 year old remote die? No answer, just come in and buy one. I have no faith in my dealership's service department based on previous repairs unfortunately, so I thought I'd ask here. My local locksmith will attempt a re-sync for $50, but they said if they're both not working it's not that. Unfortunately this year model won't allow the user to add or reprogram a remote. Thanks in advance for any ideas of what to try, or what might be the issue. -
Here’s my Walter.
-
I have less than 300 miles on my 2020 GMC Sierra 2500HD. I have utilized the remote start feature on my fob 3 times so far. Each time, upon entering the vehicle, I place my foot on the brake and push the start button to bring it up to life. Everything works fine, with the exception of the infotainment screen. It remains black, with the exception of displaying the rear camera view when I back out my driveway. Once back in drive, it goes back to black. I have to park the vehicle, turn it off, and then re-start using the vehicles start button to bring the display back on. Anybody else having this issue? -
Hello, I have a 2001 GMC Sierra 2500HD, the keyless remote receiver seems to be going out on the truck because i notice it is very selective on when it wants to work, from what distance, and every other factor in general. I even replaced the battery in the original remote and have reprogrammed an identical remote to my truck and it still acts the same. I opened up the dash to find the keyless entry receiver and have the part number #15732806 yet trying to order a new one I come to have found out that it is discontinued and cannot find one online to replace it with. My question is, can I get another keyless entry receiver from say a 2005 or 2007 or 2003 or any other suv/truck from GM and plug it in and just re-program the remote to the receiver, or is there something else I can do to get a new receiver even though the part is discontinued, or basically what are my options?
-
I have had a problem with my remote keyless entry system on my 2001 Chevy Silverado for at least a year now. I have not been able to unlock or lock my vehicle from any distance, rarely only within a few feet, and even then it is intermittent. I bought the correct replacement key fob, and through several long attempts I was able to program it to my truck, and it has the same problems as the original key fob, which I did try to re-program as well. I am quite certain the problem is due to the wireless receiver in the truck, however I find limited and varying information on where it is located to diagnose or replace it. I went to a Chevrolet dealer earlier and was told it would cost $150 for them to just look at it. I am capable of doing many repairs myself and would like to know if anyone could help find where the malfunctioning component is, or if there are any other tests of some sort that would help me. Thanks.
-
Hey Techs, I own a GMC Sierra 1500 2009, I don't have a remote start feature on my FOB. In my manual it states "If your vechile does not have the remote vechile start feature, it may have the remote start ready feature" If I do, is it possbile buying just the FOB with the start feature and getting a technician to program it for me? Or even doing it myself? I know there's a option on my dash when I skim through my odometer, tachometer, etc. theres something that I remember seeing called remote key. Maybe a way to program the remote starter? If not does anyone know how much a GM technition charge for a factory remote starter? Thanks.
-
So I had this problem and it started while driving in a rain storm. It sounded like someone knocking on a door constantly for about a full minute. Perfect knock on wood sound. Then it stopped. Then about ten minutes later the tire pressure monitors quit working and tire signal flashed and tire pressures on all tires showed line instead of pressure. Everything went back to normal after five minutes. Twenty minutes later DIC screen says remote not detected. I left car with remote in pocket and doors locked. When I got back doors would not unlock with handle button. I left remote in car and walked away and car locked with remote inside. Had to get locksmith out for that one. Tire light went back on and was not sensing all tires. Changed battery in remote. Reprogrammed remote and would only start with remote in special pocket and kept saying no remote detected. One hundred miles down the road everything started working correctly. Please help if anyone can
-
From the album: Sierra 15
