Search the Community
Showing results for tags 'charger'.
Found 2 results
-
Got my full console from Ebay used in like new condition. I did alot of research to figure out how to wire it so all the functions would work. I.e. wireless phone charger and usb/ cigarette liter ports for the rear passenger. I have a currently have a 22 2.7l Custom that doesn't have the required connection under the front passenger seat. After hours of looking at schematics and testing wires, I managed to hard wire my center console to the fuse box on the passenger side. Wire on the CC harness to Fuse box Both Red/white to F5 (Battery positive) Violet to F20 (Accessory on) Violet/yellow to F23 (Accessory on) BOTH Black to Ground below the Fuse box. The only section I wasn't able to get working yet is the USB in the middle of the console (the one with the map SD card). This one I believe needs to be connected to the radio that has the built in navigation. (once I get one I'll update this post.
-
This wireless charger has me stumped. Can anyone help? I bought the new charger from a 2018. Installed it and got nothing. During trouble shooting I found green and purple/yellow wire cut by the console lid....repaired it and still nothing. I’m receiving over 13v on the green wire....not purple/ yellow wire. I even tried reversing purple and geeen wire on the truck and only received the lighting bolt on the radio but phone didn’t charge. When I did this the 13v dropped to 2v. I tried to hook the charger to a small 12v battery and it powered up and phone charged when power was applied to green and black wire. I read several post where this new charger worked plug and play but I wondering if pinout is different configuration on 2015 Yukon for some reason?
