Search the Community
Showing results for tags 'HMI'.
Found 6 results
-
On the 13.4in Infotainment screens has anyone heard or know of a way to get Apple CarPlay or Android Auto to take up the whole screen? Since GM is dictating what can and can't be full screen. Android Auto and Apple CarPlay can easily scale up so it's not a limitation on the phone software. You can download Apple and Google developer simulators that scale them up to ridiculous resolutions and aspect ratios. So clearly it's GM forcing the phone projection to only the middle screen, but they let the built-in Google Maps take up the whole screen. Since the trucks are using Android you can enable the built-in developer options, but none of the settings it unlocks do much. Even the usb debugging option doesn't connect to a computer unless there's a specific HMI usb port for it. -
Hey guys, I'm back with another very exciting feature to reveal. It's been requested by many of you that I release a Video in Motion mod for the 2.5HMI for quite some time now. Well, I'm happy to say I've finally cracked it and I'm happy to offer this service for the loyal viewers of this forum. First of all, let's talk basics. If you have a 2014-2016 you'll notice you can play video but only while in park. And if you have a 2017 or a 2018 GM vehicle you'll notice you cannot play video at all! Well, I have solved this problem with a 2 for 1 solution. Regardless of your year between 2014-2018, I am happy to offer Video in Motion and Video Enabling for ALL 2014-2018 GM models Please, do not hesitate to contact me if you'd like this done. Special forum pricing will be given as a thank you towards everyone who has supported me and has encouraged me along the way. I would not have been able to do this without you guys. Thanks for putting your faith in me. Enjoy the demo, and like always, if you're interested - send me a PM. Until next time... -Mag *Edit* - For those of you who are curious, this allows videos to be played through USB. We will be adding other input options in the future. This will also allow full navigation controls in nav as well as texting and keyboard use which is usually restricted while driving. And this should be a given but this is for off-road or passenger use only. Please let me know if you have any more questions!
-
See a lot of questions asked about this and not a lot of set info on the upgrade. Hope this helps even anyone trying to set it up. **READ ALL INSTRUCTIONS AND WATCH ALL VIDEOS PRIOR TO ATTEMPTING PURCHASING OR INSTALLATION** Apple CarPlay / Android Auto functionality is not supported in any 2014-2015 (Many 2016) Silverado/Sierra’s. This is due to neither application being available from Google or Apple when these vehicles being built, therefore not an available option during these model years. The following instructions are designed to simplify the process as much as possible. Three things are required for this upgrade (ONE) Radio Module, (ONE) HMI Module, and (ONE) USB Hub 2016+. Search around for the modules, they are available for purchase from many different locations. EBay, totaled vehicles, junkyards, or other various websites to find them. AGAIN, if the part numbers are not listed below DO NOT purchase them. It is highly encouraged to not try and cut corners with purchasing part numbers of modules not listed as they cannot be flashed to work properly. **DISCONNECT THE BATTERY PRIOR TO INSTALLING FRESHLY UPDATED MODULES** TOOLS REQUIRED: Trim Removal tool 10 mm Socket 7 mm Socket PARTS REQUIRED USB HUB P/N 13519224 (BLACK) P/N 13509943 (WHITE) HMI Module USE ONE OF THE BELOW P/N’S IF YOUR TRUCK CAME FROM THE FACTORY WITH NAVIGATION. ONLY REQUIRED TO PURCHASE ONE P/N. 84006103 84048396 84096817 84156701 81431943 84296482 USE ONE OF THE BELOW P/N’S IF YOUR TRUCK CAME FROM THE FACTORY WITHOUT NAVIGATION. ONLY REQUIRED TO PURCHASE ONE P/N. 84096815 84156699 84131941 84296480 84004948 84048398 84131941 84296480 RADIO MODULE USE ONE OF THE BELOW P/N’S IF YOUR TRUCK CAME FROM THE FACTORY WITH BOSE. ONLY REQUIRED TO PURCHASE ONE P/N. 84062073 84293226 13506371 23402903 USE ONE OF THE BELOW P/N’S IF YOUR TRUCK CAME FROM THE FACTORY WITHOUT BOSE. ONLY REQUIRED TO PURCHASE ONE P/N. 13506387 23402909 84062056 84293243 Once acquiring the parts you can now send them to be flashed. These modules will be flashed to your VIN and will then be plug and play. Copy the link and follow the prompts. http://www.whiteautoandmedia.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=98&category_id=44&option=com_virtuemart&Itemid=54 If you have followed all the directions up and to this point, select yes for hardware match. You can chose if you would like the maps updated on your NAV if you so choose. You will be emailed your order number from WAMS, this is EXTREMELY IMPORTANT. You will be required to ship your parts either FedEx or UPS, they will not accept packages from USPS. You will need to write your order number on the box to ensure your order is properly handled. Turn around is approximately one week from shipment to return. ONLY ship your (ONE) Radio Module and (ONE) HMI Module. Maintain your USB Hub. Once you have received your parts from WAMS you can begin installation. Disconnect your battery prior to installation. To install the radio module watch https://www.youtube.com/watch?v=I2MYuuyqLrs. For the purpose of this install start the video at 1:00. Stop the video at 2:04, the radio module is visible with a green connector on the far left. Simply begin disconnecting all of the connectors plugged into the module, once all are removed you can slide the module out of the dash. It is retained only by the tension of the cables plugged into it. Replace with your new module, you can now continue the video and finish putting the dash back together. Stop the video at 4:10. To install the HMI Module watch https://www.youtube.com/watch?v=sFe2gwlOsD4. Stop the video at 2:00. The module being described behind the crossbar is what you are replacing. Remove all connectors, the module is retained with a plastic clip on top. Installing the module along with the glove box, is self explanatory. Take note of the plastic tabs on the sides of the USB Hub you are preparing to install. Those tabs can be depressed with a dental pick and gradually removed out of place. Once removed, disconnect the harness and reconnect. Installation is now complete. You can now reconnect your battery and start your vehicle. Initial start up might take a few seconds to initialize, and temperature defaulting to 32 degrees is normal. Android Auto and Apple CarPlay require hardwire connection, so to test functionality it needs to be connected to the newly installed USB hub. MVI Inc (https://www.gm-navigation.com/) offers kits and other customization options if the above is not something you feel comfortable acquiring on your own. Hope this helps, should be pretty cut and dry. There might be other methods, but this was the cheapest I discovered. If you have any questions don’t hesitate to ask. -
Hello again, everyone. Back here with another update of yet another unlock that has been discovered for the HMI - Rear Camera in Motion! This one has been pretty sought after and I'm very excited to be able to offer it to the community here. This unlock can be performed on any 2014 - 2018 GM truck that has a rear camera installed. It requires the use of an additional harness which I provide. This unlock places a "Camera" application on the screen of the HMI which allows the user to view the rear camera for 25 seconds while the vehicle is driving. This is perfect for checking on your trailer connections while on the road or just viewing any obstacles behind you. Please see the video demo below and feel free to send me a PM if you're interested in adding this to your vehicle. Thanks for looking.
-
Hey crew! As many of you know, I've been hard at work on these HMI's for about 9 months now ever since I purchased my GMC Sierra last summer. I have since started programming modules for many of you right here on these forums and I could not be more grateful for all of your support and kind words. A feature that has been requested from me many times over has been custom boot animations/logos/sounds and I am very happy to announce that after a lot of research and many nights of testing and programming I have finally achieved this task! Please see the video below for a small demonstration. If any of you are interested in getting this done to your vehicle equipped with a 2.5 HMI please send me a PM and we can discuss this upgrade! Also, Please post ANY programming requests you'd like done on your truck and I'll do my best to make it a reality. P.S. - This is just the beginning, there's lots more to come. Stay tuned... -Mag -
From the album: Service Report Log
My service report for the radio display after it was fixed. I am in no way implying that this is your vehicle's specific problem and/or solution, but I am posting this for general awareness and information purposes.
