Search the Community
Showing results for tags 'HD'.
-
Zane Merva Executive Editor / Publisher - GM-Trucks.com June 21st, 2019 We recently had a chance to check out the all new Silverado HD. The 2020 Silverado HD has an optional 8 camera system to help aid in towing your trailer. We get a full walk through of the various views and camera angles.
-
I BOUGHT A 2012 silverado 2500 in facebook marketplace but the person who had it didnt have the hardware/clips/bolts to put it together. He ziptied it together, I NEED HELP FINDING WHERE I CAN BUY ALL THE HARDWARE to assemble it properly! IN THE IMAGINE I CIRCLED WHAT I NEED
-
I own a 04 chevy silverado 1500. The brakes are spongy ( I've bleed them throughly, new everything except booster and master). My work trucks brakes are great 06 Sierra 2500 hd dual piston calipers all the way around same pads as the ones in my chevy. The question is can I upgrade to a dual piston the rear? They currently have the wimpy single piston. If an upgrade is possible do I need to upgrade the Master cylinder to accommodate the extra volume? If so can I just order the 2500 hd master cylinder?
-
Hi, I have 2 questions. One, I want to do the HD Front end conversion on my 2007 NNBS Silverado1500. I know what I need, and I have decided on the 2011-2013 HD grill and bumper. I have gone on line and seen some people go with the 2007-2010 HD hood and some people go with the 2011-2013 HD hood. Would any one know the difference or if one fits better onto the 1500 truck? And does anyone know how to install the bumper? And the second question was, How can I convert the truck into full electric mode? I have manual windows and no power locks. My truck is extended cab and I would wish for the back windows to work as well. Or does anyone have a really good video on what parts I need and how to do it step by step? I am by no means a mechanic but i do work on my trucks here and there on small things. Thanks in advanced! -
We are upgrading to a 2020 GMC AT4 HD 3500 and should be delivered soon. Asking $47,000 Follow this link for additional photos Facebook Marketplace ad So...Look no further for your next tow vehicle! Tow in style, tow with confidence!! This 2015 GMC Denali HD 2500 in Black Onyx has all the bells and whistles and more! She has only 52500 miles on her! This truck has been upgraded with BlueOx Gooseneck Hitch, a Second 7 Way connector in bed to secure your Gooseneck or Fifth-Wheel camper trailer wiring harness to help you tow in comfort and with confidence. It has also been upgraded with a Pop-A-Lock remote lock actuator for tailgate (unlocks tailgate when you unlock your truck). To help with those horrible GM headlights, this Denali has been upgraded with GTR Lighting Gen 5 HID 5000K headlights and Morimoto XB LED foglights...I cannot begin to tell you how much of a difference this has made! For just that little bit of oomph or MPG, this GMC has also been upgraded with the Banks Ram Air intake and Banks exhaust with chrome tip. Upgraded Shocks to BILSTEIN 5100 series shocks at 43500 miles. A Banks AutoMind programmer, is available and negotiable with purchase of this 2015 GMC Denali HD.
-
Got my hands on a 2020 Silverado 2500hd! Long awaited for me for sure, seeing that they are making their way on to lots. Lets start! Exterior: This particular truck I drove was a Work Truck. In person, the HD is much easier on the eyes, but the WT is, I feel, the least attractive. I think its the black grille treatment that puts me off. This truck had the 17" carryover steel wheels, wrapped in LT265/70R17 Firestone TransForce AT tires (yes, the carryover AT not the AT2). Options list was minimal, including the WT Convenience Package, Integrated Trailer Brake Controller, the AT tires and black bowties. Overall, the truck's exterior is very functional. The bed steps are genius. Sure, they don't tuck away like some aftermarket designs do, however as a result they maintain bed rocker ground clearance like there isn't even a step there. Now, I am personally not a running board guy, mainly for looks (and I think 1/2 tons and Colorados are too low stock for them), but this thing needs them! Definitely an increased step in height with the T1 over the K2 HD. Its noticeable. Also, the size increase is noticeable too. I think its within an inch or so height wise to a Super Duty, and the body is just as wide as one. They dwarf the K2 HD. I do think that the 18" wheels are a must for looks, as they run a 33" tire and suit the truck's profile much better than the 17" wheels do as a result of the 31.5" tire they use. The towing mirrors. Totally functional. I can definitely get behind the way they are mounted once you drive one. This one had the base tow mirror, so just heat and power upper glass. There is much better visibility in the A-Pillar to mirror sightline. I found the extending not what I thought it was going to be? Its actually positionally detented. You pull it out and it comes off the arm a touch and then hits the outer detent. No "in between" position, but that might be just because its the base mirror. Oh! Another interesting fact. No aluminum body panels anywhere that I could see. Its all steel. The hood, doors, tailgate, all steel. Honestly, I was expecting some aluminum somewhere, like the hood at least, maybe the doors. GM wasn't joking when they said it only shares the cab structure, otherwise everything was unique to the HD. The biggest giveaway to those keen enough to notice, is the "CHEVROLET" area on the tailgate. Its nowhere near as protruded on the gate as the 1500 gate. Interior: See 2019+ T1 1500. Don't expect anything different here. Its still a good interior ( I think), apart from some questionable material choices in spots. I will add one important bit. Anyone looking at a WT or Custom trim HD, make sure you sit in an LT or higher with a power seat. The hood is even higher yet than a K2 HD, and the tall front at the end of the hood can be a bit tricky. I'm 5'10" and felt the standard seat to be ok, but some more height would have been nice around a parking lot/close to other cars. The mirrors, see the exterior description above. Powertrain/How it drives: The big bit. This truck had the 6.6 L8T gas V8. For being as large and heavy as this truck is, that powertrain is much improved over the L96, and long overdue. I didn't time anything, but it can move quite well when you want it to. I pulled out from an intersection normally, hit 2nd gear and rolled right into it and it took off quick. The K2 HD dead feeling accelerator pedal is gone too (thank god) and the power feels in line with your right foot. Much better response. Mileage wise, I averaged 15mpg, I'd say 65/35 city-highway split? Even the 6L90 shifting is improved. Do I still hope they throw the 10L90 in it? Yep. But the 6L90 has been a strong unit, and the added power makes it a good package for the time being. The added wheelbase smooths the ride out a touch. Stiffness? Well, its an HD LOL and had 80psi in the rear tires, but it was still well behaved. Overall, a nice improvement on the K2 HD. Love the mirrors, love the power, the bed steps all around. Love the look more or less, could use some interior help for sure. Big thanks to Cavallaro Neubauer Chevrolet in Williamson NY for letting me borrow this beast! Link to the window sticker for the truck: https://www.cnchevy.com/f_WindowSticker?VIN=1GC4YLE79LF117398&cs:o=%window_sticker%&cs:o=%27WindowSticker%27
-
Thom Cannell Contributor, GM-Trucks.com February 13th, 2019 Flint, Michigan, was cold on Tuesday, gray with a winter sleet warning in the forecast. It was a perfect day to launch Chevrolet’s all-new 2020 Silverado Heavy Duty truck in the face of the just-launched Ford product and almost-here RAM. Flint is where the truck will be built in a brand new plant that’s part of the 159 acre, 3.3 million square foot Flint Assembly plant. In an eerily quiet staging area, first plant manager Michael Perez talked about the 3,000-strong work force and the plant’s longevity, and the recent 1.5 billion dollar investment. Flint is GM’s longest continuously operating assembly plant, having produced more than 13-million vehicles since opening in 1947. Interestingly, the first 300 production Corvettes came from Flint in 1953. Then Silverado HD chief engineer Jaclyn McQuaid described its advanced trailer tow features, the fully boxed High Strength Steel frame, and its two new powertrains. She spoke about a tow rating minimum of 33,000 pounds for every dually, not just the 35,500 maximum for a specific option set. That maximum tow rating is up 52-percent! Mark Reuss, president of GM described their truck strategy and last year’s 973,000 truck sales. He projected strong earnings for 2019, now that the three-truck strategy is in effect—Colorado, Silverado and Silverado HD, plus Medium Duty 4-5-6 series trucks. He also commented on, but gave no details on the 3.0-liter Duramax diesel engine for light-duty trucks. Damn! Mark was followed by chief designer Rich Scheer, who outlined exterior and interior changes like the corner-step and bed step, same-height bed rails, integrated block heater outlet, and easy fitment to snow plows. “We knew if we could pull off something this dramatic, nobody would mistake our Heavy Duty for a Light Duty -- and that would be our competitive advantage.” Rich then went for a Trim Walk, from Work, to Custom, to LT and chrome, the LTZ with more chrome and LED headlights, and finally High Country with its body-colored bumpers and 20-inch wheels. With the talking complete, these are the things that grabbed our attention: first, two new engines and two new transmissions. Each powertrain is based, somewhat, on existing products. We’d been waiting for the new gas engine in particular. Based on the 6.0-liter V-8 small block, its longer stroke ups displacement to 6.6-liters with a power output of 401 horsepower and 455 lb.-ft of torque at 4,000 rpm thanks to Direct Injection. It offers 18-percent greater tow capacity. We’ll have a complete photo essay after the Chicago Auto Show, which we’re currently attending. The diesel, all 910 torques of it, is mated to an Allison® transmission boasting ten speeds; a very low first gear and several overdrive gears. The main benefit of having ten speeds is keeping diesel engine RPM in the best band for torque and for perfect no-brake downhilling. Again, more after Chicago. Except for one note, because of the massive 12-inch ring gear and larger prop shaft and axles, Chevy (and of course GMC) promise every single foot-pound of torque can be applied in first gear. Even that lower first gear. The Introduction & Reveal When we stepped into our meeting room, several partly assembled trucks were in mid-test form. Using coordinate measuring machines that index to established hard points, precise measurement of how individual parts fit, and how the whole assembly conforms to engineering standards is established. This hanger-sized area would be for temporary storage. On this Tuesday, every truck writer in the USA sat alongside engineers, executives and teammates. Michael Perez, plant manager delivered a history lesson on the oldest of GM’s plants and the workforce represented by UAW Local 598 that will build GM’s Heavy Duty trucks in volume, starting in summer. Mark Reuss, GM president, spoke about Chevrolet’s five-truck strategy, how General Motors sold more trucks than anyone last year, and how the company expects to continue improving its products. (Now, if only there were some extra funds for interiors…) Jaclyn McQuaid is the chief engineer for Heavy Duty, and she produced two bare chassis to extol the boxed High Strength Steel-y goodness thereof. Most interesting is the claim that each Heavy Duty truck can apply 100-percent of its available torque in first gear without turning the driveshaft into scrap. She also debuted the new gas engine, which we had not expected. The upgraded Duramax 6.6-liter V-8 mates to an Alison transmission, a segment exclusive, and the powertrain offers an optional, warranted, PTO, another exclusive. Frames are available with built-in gooseneck cross-body reinforcements and bed holes from the factory, saving extra costs and possible fitment misfits. Another option is an Autotrac two-speed transfer case for 4X4 models. It’s fully electronically activated. One sought-after upgrade for diesel trucks is easier access to DEF, and a way to monitor DEF quantities. The new Silverado HD encloses the DEF filler behind the fuel door and provides a DEF quantity monitor. (This is welcome, needed, but hardly novel.) If you need a gooseneck setup, GM offers it from the factory. It includes a bed already perforated during production, so is fully coated on all surfaces for less rust potential. Closer view of the diesel powertrain, with the PTO option. GM’s new small-block 6.6-liter V-8. The tall intake manifold is made from Nylon 6-6, and we’ll provide more details soon. Even the gas engine, which does run on 87 Octane fuel, offers a factory PTO. One of the novel options is smart trailer integration, which is designed to work with ASA Electronics iN∙Command® control system. This offers control over trailer features like heat and air conditioning. You control it from the dash, or your myChevrolet mobile app. We mentioned the designed-in easier fitment for snowplows. No cutting required. This Cougar trailer is the one monitored in our infotainment center photos. There’s nothing like proving your truck can pull a large trailer. However, note the new towing mirrors. They slide in-out to provide coverage for trailers that don’t have the transparent trailer view option. Some venues have greeters. We had a new Silverado to welcome us. The Flint Plant Tour Largely robotic, the plant uses JIT or Just In Time parts that arrive in reusable fixtures. We weren’t told how many robots there are, but 3,000 people make the trucks. Everything possible is done to prevent scratches and dents. While it would seem that once a part is designed and the stamping die constructed, the job is over. Not so. Constant measurement is part of the process. Using multiple part profiles, this video-enabled dimensional test device looks at minute, hair-thin deviations from specification. Once is an aberration, but several would require intervention in production. At start-up, every part is tested. Thereafter, a statistical sample will be used. Remember when we said beds were produced for fifth-wheel or gooseneck applications? These are raw parts in several bed lengths, prior to welding into complete beds. Parts arrive from GM’s attached metal stamping plant on AGVs, Automated Guided Vehicles. Laser-guided (look at the up-looking towers), they flow throughout the plant on designated paths. Smaller parts are tugged throughout the plant by AGV tugs. They operate in strict lanes. Partly assembled bodies and beds head towards the paint shop to be immersed in protective chemistry, prior to the paint shop’s base and clear coat application. Wondering about the upside-down tailgate? It’s so the anti-corrosion primary coating can drain out through what will be bed-top mounting holes.
- 15 replies
-
- 1
-
-
- 2020 silverado hd
- silverado hd
- (and 6 more)
-
Assigned GM RPO code PDB and priced at $395, the Dark Essentials Package for the 2020 Silverado HD gives the heavy duty pickup truck black badges, including: Black front Bow Tie logo (SFZ) Black Silverado nameplate (RIK) Black 2500HD/3500HD model plate (RIK) Black trim nameplates (RIK) Black tailgate decal lettering (SB7) The package is an LPO / dealer-installed option available on the 2020 Silverado 2500HD and 3500HD models, but not on the Silverado 3500HD Chassis Cab (Chassis Cab) variant.
-
Just got new flares on and painted, 4" SST lift (have it at 3", 34.5: Ridge Grappler, custom grilles, light bar, painted mirror caps, chrome de-badged, black 2500hd relocated, black GMC emblem front and rear
