Search the Community
Showing results for tags 'Bambi'.
Found 2 results
-
There have been a few post on mods including tying the cargo light to the reverse and tying fogs to the parking lights (but that mod makes the fogs on all the time and I don’t normally drive with my fogs on with others on the road). So I have 2 detailed mods below. Like the rest, you will need an appropriate diode. I used the 1N004. Remember, the stripe on the 1-way diode shows which direction it blocks. 1) Like the K2 mod where the fogs are still selectable while low beams are on But come on automatically with the high beams (ironically it is also the same pin locations and wire colors of the K2 series) 2) The other part makes this truly an all forward light mod for the T1 as it also includes the mirror’s task lights to also turning on automatically with the high beams. DID NOT WORK SINCE THE TASK LIGHTS STILL TURNED OFF WHEN TRUCK IS PUT IN DRIVE. I will keep working to find a solution for the task lights to stay on.
-
Very similar to the trucks but slight differences. I just did a Sierra AT4 and had some 1N4004 diode left over from Amazon. The K2 and the T1 trucks are the same plug, wire number and colors. The SUV just don’t have a white stripe on the brown fog light wire. I am also working on having the running board lights and possibly the mirror puddle lights come on with the fogs.
